Water tank cleaning

100PPM (50~60:1)

Clean once every six months

① Remove the water completely, ② Dilute to 100PPM and spray it sufficiently inside the water tank using a low-pressure sprayer. ③ Leave it for 30 minutes. Bacteria attached to the surface will flow down by themselves. ④ Wash with a high-pressure sprayer, remove the contaminated water completely, and fill it with water.

Sterilization of general drinking water

0.5 ~1PPM (12,000~6000:1)

All the time

A metering pump is installed at the area where water enters the tank. Automatic adjustment according to the amount of water flowing

General room, emergency room, general office, doctor room, kitchen, laundry room, baby room

60PPM (100 : 1)

10 seconds ~ 15 seconds (20㎡ standard)

• Set the number of times for each hospital to be autonomous, and sterilize the respiratory and internal disease related rooms once a day. • Diluted chlorine dioxide is not a problem for adults, but move sensitive babies to other places. • Close food lids before sterilization.

operating room

200PPM (30 : 1)

1 time use immediately after surgery

Before surgery, sterilization in general space is the same

Vent ducts, etc.

200PPM (30 : 1)

As needed

The duct needs to know the structure clearly. Identify breeding sites of germs

Surgical tool

120PPM (50 : 1)

Dipping for 1 hour, closing the lid to prevent leaking of chlorine dioxide gas

When sterilizing surgical instruments, first use it after cleaning with general drinking water.

Garbage collection hall

50PPM (120 : 1)

Sterilization for 5 minutes every 2 hours

Cooking tools

50PPM (120 : 1)

1 time a day

Stainless steel, plastic, rubber and wood are no problem. However, in the case of ordinary steel materials, clean with sterile water after sterilization (corrosion protection)

Sterilization of vegetables, fish, etc.

5PPM (1,200 : 1)

Dip for 3 seconds, then take out and wash with normal sterile drinking water.

Outdoor (parking lot, landscaping trees, etc.)

60PPM (100 : 1)

Every 15 to 20 days